5 Ways to Save Water, Energy, Money, and the World in One Afternoon
Ambitious title for sure, but not that far off when you look at the facts surrounding freshwater. According to water.org, 884 million people (one in eight in the world) lack access to a safe water supply. Less than 1% of the world's fresh water (or about 0.007% of all water on earth) is readily accessible for direct human use. Furthermore, an American taking a five-minute shower uses more water than the typical person living in a developing country slum uses in a whole day.
All environmental guilt issues aside, saving water is not only good for the planet, it can be a highly efficient way to cut your water and energy bills (energy to heat the water). Here are the top 5 ways that you can cut your water use today. (See also: 7 Ways to Lower Water Heater Costs)
1. Install a Low Flow Showerhead
If you take anything at all from this post, let it be this: get a low flow shower head TODAY. One 10-minute shower with an older shower head uses 55 gallons (5.5 gallons per minute) on average. Most shower heads made before 1992 have a 5.5 gpm flow. The newer, high efficiency Energy Star models use less than half that (2.5 gpm).
Energy star showerheads will run you about $35, on average. It only takes two minutes to take off an old showerhead and put a new one. That two minutes and $35 investment would save a family of four 27,500 gallons of water and about $260 in energy costs per year (not to mention the water costs).
That's right, a $35 investment would net you $225 in year one and $260 every year thereafter. That's a 640% return on investment within just one year! Plus the residual effect of feeling better about yourself for saving water.
2. Reconsider Hand Dish Washing
If you've switched to hand dish washing from a dishwasher, you may be doing more harm than good. Today's energy efficient dishwashers can do the job on just a few gallons of water. An energy efficient dishwasher can save you at least $30 per year on energy alone (vs. heated dish water) and roughly the same in water costs.
There are actually 11 dishwashers on the market right now that use less than 2 gallons per cycle! How many of us use more than that hand washing dishes? I'm guilty. Bosch has the most efficient dishwashers. Check out the Energy Star dishwasher site to sort by water and energy usage per cycle.
3. Fix that Leaky Faucet
A leaky faucet can waste 2,500 gallons of water per year. If it's hot water, this could cost you $39 annually. Even if it's not hot water, 2,500 gallons is a whole lot of wasted water to have on your conscience. Here's an eHow video on how to fix a leaky faucet.
4. Dig Out the Grass
I live in Michigan, which has a humid and moderate climate, and my grass is green for about 2 months out of the year unless it is watered constantly. In more arid climates, the efficiency is likely worse. That's why when we re-landscaped last year, we ripped out two-thirds of the grass in our front yard and put in a garden.
It takes a ton of water to keep your grass green, not to mention the inevitable sidewalk and driveway runoff that keeps nothing green. The irony is that constantly watering your grass can do it more harm than good. Grass goes brown in hot weather for a reason — it is going dormant to protect itself from the sun.
There are plenty of ground coverings that look great without requiring much, if any, water. Depending on your climate, take a serious look at sedum, pachysandra, myrtle, creeping lily turf, or good ole' wood chips, rocks, and ornamental grasses. They tend to look much better than dormant, dead, or weed-ridden grass.
5. Fix Your Leaky Toilet and Make Sure It Has a 1.6 gpf
Your toilet might be leaking, and you don't even know it. If you hear any noises when not in use or have to jiggle the handle, you most likely have a leak. Not sure? Put dye tablets in your tank and wait an hour. If you see any dye in the bowl, you have a silent leak on your hands. It's usually an easy fix to take care of.
Better yet, why not replace your old toilet? It can be done for about $100. Back in 1994, the U.S. government mandated that toilets use no more than 1.6 gallons per flush (gpf) vs. the standard 7 gpf. That's a huge difference!
The average person flushes a toilet 2,500 times per year. That equals 17,500 gallons of water with a pre-1994 toilet, but only 4,000 with a low-flow toilet. That's a savings of about $60 annually. If you have a remnant pre-1994 toilet that is anything above 1.6 gpf, you are flushing your money down the crapper.
Interested in More?
Check out G.E.'s Green Matters category on 20somethingfinance.com, where he discusses the economics of a motor scooter vs. a car, electric vehicles, energy savings, and how to fund your retirement through commuting.
This is a guest post by G.E. Miller. G.E. is the creator of 20 Something Finance, a personal finance blog that focuses on lifestyle, career, investing, and other money topics geared towards young professionals.
Disclaimer: The links and mentions on this site may be affiliate links. But they do not affect the actual opinions and recommendations of the authors.
Wise Bread is a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for sites to earn advertising fees by advertising and linking to amazon.com.